Will the Caribou Gear Waterproof Rifle Cover Fit Your Scoped Rifle?

Quick answer: The Caribou Gear Waterproof Rifle Cover is listed for scoped hunting rifles from 36 to 56 inches long. It has an adjustable inner pull cord, two 13-inch hook-and-loop straps, and listed clearance for a 1¾-inch suppressor. Length is the first check, not the only one. Check the rifle as you actually carry it, including the scope and any installed muzzle equipment, before you count on a comfortable fit.

A cover that fits on paper but pulls tight over a turret, leaves the muzzle exposed, or shifts every time the rifle moves is the wrong setup for that rifle. A five-minute check at home is worth more than discovering that at the trailhead.

Measure the rifle in its hunting configuration

Unload the rifle, verify it is clear, and keep the muzzle pointed in a safe direction while checking fit. Measure the overall length from the buttstock to the end of the barrel or installed muzzle equipment, whichever is the actual end of the setup you will cover. Do not use the barrel length printed on a box. That number leaves out the stock, action, and any equipment beyond the muzzle.

If the rifle falls outside the listed 36-to-56-inch range, do not assume the adjustable cord or straps will make up the difference. If it is close to an end of the range, the next question is how the cover sits over the full profile, not whether you can force it on.

Check the high points, not just the length

Most hunting rifles are not a straight line from stock to muzzle. The mounted scope, turret caps, rings, cheekpiece, sling hardware, and muzzle equipment all affect how a cover lays on the rifle.

• Scope and turrets: The cover should settle over the optic without being stretched hard across its highest point.
• Stock: The built-in stock pocket needs to seat properly rather than hanging partly off the butt.
• Muzzle end: The barrel sleeve needs to cover the actual end of the carried setup.
• Accessories: Check that sling mounts and other protrusions do not prevent the cover from sitting where it is designed to sit.

The product page lists compatibility with a 1¾-inch suppressor. That is a published fit specification, not a promise that every combination of rifle length, optic height, and installed equipment will fit. If your setup is unusually long or tall, confirm the measurements with Caribou Gear before ordering.

Know what the adjustment and straps are for

The Caribou Gear cover has an inner pull cord to adjust the fit around the rifle and scope. It also includes two 13-inch hook-and-loop straps to help secure the cover during rough movement and transport. Those features help a correctly sized cover stay put. They do not turn an undersized cover into a larger one.

For a truck, ATV, horse, or bush-plane leg, check that the cover stays seated and the rifle is restrained separately as the situation requires. A waterproof field cover reduces exposure to rain, snow, mud, dust, and brush. It is not a hard case, and it is not a substitute for safe transport or the rules that apply where you travel.

Make the purchase decision from the actual setup

Write down three facts: overall rifle length as carried, the highest point of the mounted optic, and whether muzzle equipment stays installed during travel. Then compare your setup with the current Caribou Gear Waterproof Rifle Cover specifications and product images.

For a standard scoped rifle within the published length range, the cover is designed to provide lightweight field protection without the bulk of a hard case. For a nonstandard stock, unusually tall optic, or setup near a stated limit, ask a fit question before checkout. Do not base the purchase on overall length alone.

If you are still deciding what kind of protection your hunt needs, read what a rifle cover needs to do on a Western hunt. That guide covers the broader protection decision; this check is about whether the cover fits your particular rifle.

Waterproof Rifle Cover Fit FAQ

Will the Caribou Gear Waterproof Rifle Cover fit a scoped hunting rifle?

It is designed for scoped hunting rifles within its listed 36-to-56-inch fit range. Check the rifle's full carried length and the shape of its mounted optic and accessories before ordering.

How should I measure my hunting rifle for the cover?

With the rifle unloaded and verified clear, measure from the buttstock to the farthest point of the barrel or installed muzzle equipment in the configuration you plan to cover. Barrel length alone is not overall rifle length.

Will the cover fit a rifle with a suppressor?

The current product page lists 1¾-inch suppressor clearance. Also check the rifle's total length with the suppressor installed and ask Caribou Gear about an unusual setup before buying.

Can the pull cord or straps make a too-short cover fit?

No. The pull cord adjusts how a correctly sized cover sits around the rifle and scope; the two straps help secure it during movement. Neither changes the published rifle-length range.

Is the Waterproof Rifle Cover a replacement for a hard case?

No. It is a lightweight weather and field-exposure cover. A hard case serves a different impact-protection or transport role, and travel requirements vary by location and carrier.

Can I leave a wet rifle inside the cover after the hunt?

No. Inspect and dry the rifle according to its manufacturer's instructions, and let the cover dry fully before long-term storage.